DeLOCK 62495 Manual Del Usuario página 3

English
Hardware Installation
1.
Put your full size mSATA memory into the mSATA slot of the
converter.
2. Turn off your PC and unplug the power cord.
3.
Open the housing.
4.
Insert the converter into a free 2.5" bay.
5. Use screws to attach the converter to the bay.
6. Connect an IDE cable with this drive and with your IDE
connector.
7.
With the Jumper you can set the IDE mode Master, Slave or
Cable Select.
8. Reattach the housing and connect the power cord to the AC
adapter.
Driver Installation
1. Switch on your computer.
2. The memory will be recognized as a drive and you can start
using the device immediately.
-3-