Publicidad
Idiomas disponibles
Idiomas disponibles
SET UP & USE
B. CONNECTING BLACK, WHITE, AND (RED OR BLUE)
WIRES
•
Connect white wire from outlet box to white wire from fan using marret (not
supplied).
•
Connect black wire from outlet box to black wire from fan, as well as the red or
blue wire using a marret (not included).
NOTE: The red or blue wire connection provides power to the lighting unit (if
applicable).
NOTE: Once wires are connected, carefully tuck wires and marettes into the outlet
box making sure that the wires are clear of the hemisphere and downrod
when positioned in mounting bracket. (Downrod Mount Only).
4. MOUNTING FAN ASSEMBLY
•
Place two screws and washers on mounting plate (marked B on Fig. 7a on
following page) which correspond with slots in canopy. Screw in loosely, Do Not
Tighten.
•
Position canopy to mounting plate aligning slots to screws (marked B on Fig. 7a)
then turn to lock.
•
Position and tighten the two screws and washers (marked A on Fig. 7a) then
tighten the two screws (marked B on Fig. 7a).
Black Wire
Red or
Blue Wire
White Wire
Fig. 6
ENGLISH
Page 11
Publicidad
