Publicidad
Idiomas disponibles
Idiomas disponibles
SET UP & USE
B. FLUSH MOUNT
•
Remove the yoke screws and lockwashers which correspond to the holes in the
canopy.
•
Position canopy over the holes on motor and secure with the same screws and
lockwashers removed in the previous step.
2. INSTALL MOUNTING BRACKET
WARNING: To reduce the risk of fire, electric shock, or
personal injury, mount to UL/CSA listed outlet box marked
acceptable for fan support and use mounting screws
provided with the outlet box.
•
Secure mounting bracket and rubber gaskets to outlet box.
•
Hang the safety cable onto the J-hook.
•
Hang fan on temporary hook.
Wood Joist
Outlet Box
Rubber Gasket
Mounting
Bracket
Outlet Box Screws
(not provided)
Yoke Screws &
Washers
Canopy
Motor
Fig. 2d
Ceiling
Fig. 3a
Safety Cable
Canopy
ENGLISH
Temporary Hook
Fig. 3b
Page 9
Publicidad
