Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
SET UP & USE
5. ENGAGE HEMISPHERE (Downrod Mount
Only)
•
Carefully rotate fan assembly until groove in hemisphere locks over tab of
canopy assembly.
WARNING: Failure to secure canopy assembly to fan could cause damage to
(B)
Fig.7a
NOTE: When installing fan on sloped ceiling, make sure tab on hanger bracket
faces towards the top of the slope. Depending on the slope, a longer
downrod may be required to prevent fan blades from hitting the ceiling.
6. MOUNT BLADE BRACKETS TO BLADES
Cast Blade brackets
•
Take out hardware package.
•
Place blade bracket screw through fibre washer and blade.
•
Align with corresponding hole in blade bracket.
•
Repeat with (2) remaining screws and tighten.
Page 12
electrical wires and possible shock or fire hazard.
Washers
(A)
(A)
Blade Bracket
Screw
Fibre Washer
Blade Bracket
(B)
Hemisphere
Downrod
Fig. 8
Groove
Fig.7b
Publicidad
