Sony HT-A3000 Manual De Instrucciones página 53

Additional Information
Specifications
Sound Bar (HT-A3000)
Amplifier section
U.S. models:
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC)
Front L + Front R:
With 6 ohms loads, both channels
driven, from 20 Hz - 20,000 Hz; rated
33 W per channel minimum RMS
power, with no more than 1% total
harmonic distortion from 250 mW to
rated output.
POWER OUTPUT (reference)
Front L/Front R speaker blocks: 50 W
(per channel at 6 ohms, 1 kHz)
Center speaker block: 50 W (at 6 ohms,
1 kHz)
Subwoofer blocks: 50 W (per channel
at 6 ohms, 100 Hz)
Canadian models:
POWER OUTPUT (rated)
Front L + Front R: 33 W + 33 W (at 6
ohms, 1 kHz 1 %THD)
POWER OUTPUT (reference)
Front L/Front R speaker blocks: 50 W
(per channel at 6 ohms, 1 kHz)
Center speaker block: 50 W (at 6 ohms,
1 kHz)
Subwoofer blocks: 50 W (per channel
at 6 ohms, 100 Hz)
Inputs
TV IN (OPT)
Outputs
HDMI OUT (TV eARC/ARC)
S-CENTER OUT
HDMI Section
Connector
Type A (19pin)
USB section
(USB) port: 1 A
Type A (For connecting USB memory)
Wireless LAN section
Communication system
IEEE 802.11 a/b/g/n/ac
Frequency band
2.4 GHz, 5 GHz
BLUETOOTH section
Communication system
BLUETOOTH Specification version 5.0
Output
BLUETOOTH Specification Power
Class 1
Maximum communication range
Line of sight approx. 30 m
Maximum number of devices to be
registered
9 devices
Frequency band
2.4 GHz band (2.4000 GHz -
2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles
A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio Video Remote Control
Profile)
3)
Supported Codecs
4) 5)
SBC , AAC , LDAC
Transmission range (A2DP)
20 Hz - 40,000 Hz (LDAC sampling
frequency 96 kHz with 990 kbps
transmission)
20 Hz - 20,000 Hz (Sampling frequency
44.1 kHz)
1)
The actual range will vary depending on
factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
cordless phone use, reception
sensitivity, the operating system,
software applications, etc.
2)
BLUETOOTH standard profiles indicate
the purpose of BLUETOOTH
communication between devices.
3)
Codec: Audio signal compression and
conversion format
4)
Abbreviation for Subband Codec
1)
2)
53
US