Descargar Imprimir esta página

PULOX PO-230 Manual De Instrucciones página 24

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 40
there is no visible damage that may affect patient's safety and
monitoring performance about cables and transducers. It is
recommended that the device should be inspected once a week at
least. When there is obvious damage, stop using the device.
 Necessary maintenance must be performed by qualified service
engineers ONLY. Users are not permitted to maintain it by themselves.
 The oximeter cannot be used together with devices not specified in
User's Manual. Only the accessory that appointed or recommendatory
by manufacture can be used with this device.
 This product is calibrated before leaving factory.
1.2 Warning
Explosive hazard—DO NOT use the oximeter in environment with in-
flammable gas such as some ignitable anesthetic agents.
DO NOT use the oximeter while the testee measured by MRI and CT.
The person who is allergic to rubber can not use this device.
The disposal of scrap instrument and its accessories and packings (in-
cluding battery, plastic bags, foams and paper boxes) should follow the
local laws and regulations.
Please check the packing before use to make sure the device and acces-
sories are totally in accordance with the packing list, or else the device
may have the possibility of working abnormally.
Please don't measure this device with functional tester for the device's
related information.
1.3 Attention
• Keep the oximeter away from dust, vibration, corrosive substances, ex-
plosive materials, high temperature and moisture.
• If the oximeter gets wet, please stop operating it.
EN

Publicidad

loading