Publicidad
Idiomas disponibles
Idiomas disponibles
EN
proceeding as for the previous one.
Note: the teeth of a chain has two
different directions. Sharpening first
all teeth with the same orientation,
sharpening alternately.
When you finish sharpening all teeth
with the same orientation, turn off
the machine.
Unscrew the base lock wheel of the
adjustable base.
Turn the adjustable base for the
orientation of teeth not sharpened.
It is usually the same angle, but in
reverse.
Tighten the base lock wheel.
Proceed as above to sharpen the
set of teeth.
NOTE: never forget to turn off
the machine whenever you want to
make any adjustment.
MAINTENANCE
Keep the sharpener clean from
powder and waste released by its
operation.
Check the grinding wheel's
condition before each use.
Replace the grinding wheel when it
has a diameter less than 80mm.
DECLARATION
OF CONFORMITY
We declare under our exclusive
responsibility, that the product
Chain saw sharpener, with the code
VIACE85, meets the following
standards or standardization
documents:
EN 61029-1, EN ISO 12100, AfPS
GS 2014:01 PAK, EN 55014-1,
EN 55014-2, EN 61000-3-2,
EN 61000-3-3, according to the
determinations of the directive:
2006/42/EC - Machinery
Directive.
2000/14/EC - Sound power level
guaranteed: 77 dB.
2014/30/EC - Electromagnetic
Compatibility Directive.
S. João de Ver,
February 24th of 2016.
Central Lobão S. A.
Responsible for the Technical File
WARRANTY TERMS
The warranty of this machine is two
years from the date of purchase.
You should, therefore, keep your
proof of purchase during this period
of time. The warranty covers any
manufacturing defect in material or
operating, as well as parts and work
needed for their recovery.Excluded
from the warranty the misuse of the
product, any repairs carried out by
unauthorized persons (outside the
service center of the brand VITO)
as well as any damage caused
by the use of it.
11
Publicidad
