Publicidad
Idiomas disponibles
Idiomas disponibles
3. Push the narrow end of the extension tube into the connecting piece. The locking
lug of the extension tube must lock in the matching opening in the connecting piece.
4. In the same way, plug the adapter into the open end of the extension tube or, for a
Floor Cloth
Use the floor cloth to gently wipe down the floor.
Filling the Water Reservoir
Caution
•
Always pull out the mains plug and allow the device to cool down completely before you
open the water reservoir. Otherwise there could be an uncontrolled emission of steam.
•
Do not overfill the water reservoir. Pour a maximum of 260 ml of water into the device.
•
Never hold the device under the tap and never immerse it in water to pour water into the
reservoir.
•
Never pour any cleaning agent or other additives into the device. This could destroy the
device and safe working is no longer guaranteed.
1.
The device has a safety reservoir cap (12). It cannot be removed if the water reservoir is
pressurised. Press the reservoir cap down and unscrew it in the anticlockwise direction.
To release pressure from the water reservoir, keep pressing the steam trigger (15)
until steam stops emerging from the device. The water reservoir can then be opened.
longer tube, the second extension tube and then the
adapter into this.
To disassemble the extension tube, press the release
buttons on the extension tube and adapter and pull it out
To remove the adapter from the device, turn it in the
opposite direction and pull it off.
1. The floor attachment
down the end of the clip in the middle of the floor
attachment to open the clip.
2. Insert one end of the floor cloth and release the clip.
3. Stretch the floor cloth over the bottom of the floor
attachment and secure it in the second clip.
4
has two clips on the top of it. Press
(
)
Publicidad
