RESTRAINTS SHOULD NOT BE HELD
AWAY FROM BODY BY WHEELCHAIR
COMPONENTS SUCH AS ARMRESTS OR
WHEELS
2.5
Folding/Unfolding
CAUTION
Keep fingers away from moving parts of the wheelchair.
2.5.1 Unfolding the wheelchair
1. Position yourself behind the wheelchair.
2. Use the handgrips to open the wheelchair as much as possible.
3. Position yourself at the front of the wheelchair.
4. Push both seating tubes down till they are fixed in their position.
2.5.2 Folding the wheelchair
1.
Fold the footplates or remove the footrests (see § 3.1).
2. Take the seat on the front side and backside and pull it up.
2.5.3 Folding / Unfolding the backrest (D200
WARNING
Risk of injuries
Risk of injury – Check that the backrest is securely locked in place before
use.
PELVIC RESTRAINTS SHOULD MAKE FULL
CONTACT ACROSS THE FRONT OF THE BODY
NEAR THE JUNCTION OF THE THIGH AND
PELVIS
)
Split
Folding the backrest is done as
follows:
1. Pull on the levers until the pin
comes out the hole.
2. Pull the upper backrest tubes
downwards until the backrest is
fully folded.
To unfold the backrest:
1. Pull the backrest tubes
upwards until the backrest is
firmly secured.
2. Check that the backrest is
locked in place.
7
EN
D200, D200 30°
2023-02
Before use
NL