Mobicool P24 DC Instrucciones De Uso página 6

_P24_P28_S25_DC.book Seite 6 Dienstag, 21. April 2009 1:55 13
All manuals and user guides at all-guides.com
Safety instructions
The cooling device is not suitable for transporting caustic mate-
rials or materials containing solvents.
Connect the device with the 12 V lead supplied to a 12 V socket.
e
Do not pull the plug out of the cigarette lighter or the socket by
the cable.
If the connection cable is damaged, it must be replaced with the
cable of the same type and specifications.
Pull out the connection cable:
– Before cleaning and maintenance
– After use
On boats: if the device is powered by the mains, ensure that the
power supply has a ground fault interrupter circuit. Danger of
fatal injuries!
Disconnect the cooling device and other power consuming de-
vices from the battery before connecting the quick charging de-
vice.
Check that the voltage specification on the type plate corres-
ponds to that of the energy supply.
1.2 Operating the device safely
Before starting the device, ensure that the power supply cable
a
and the plug are dry.
Do not place the device near naked flames or other heat
sources (heaters, direct sunlight, gas ovens etc.)
Caution! Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the
heat that arises during operation does not build up. Make sure
that the device is sufficiently far away from walls and other ob-
jects so that the air can circulate.
Do not fill the inner container with ice or fluid.
Never immerse the device in water.
Protect the device and the cable against heat and moisture.
A few water drops may form inside the cooler if it has been cool-
ing for a lengthy period. This is normal because the moisture in
the air condenses to water when the temperature in the cooler
falls. The cooler is not defective. Wipe it out with a dry cloth if
necessary.
6
P24 DC, P28 DC, S25 DC