Melchioni Family LAVIK Manual De Instrucciones página 21

USE
1. Check the heating elements before using the appliance.
2. Place the stove on a flat and stable surface.
3. Insert the plug into the power socket
4. Switch the appliance to one of the power settings.
5. When finished using, turn the power switches to the "OFF" position, then disconnect the
main power.
NOTE!
This device will cool down slowly after the power is turned off.
Allow the heater to cool down before any movement.
Unplug the device and allow it to cool down before reactivating it.
For long periods of inactivity, remove the plug from the socket.
CLEANING AND MAINTENANCE
Warning: before cleaning the appliance, turn it off, unplug it from the socket and wait until it
has cooled down.
It is necessary to periodically clean the heater and reflector, depending on the place and
circumstances of its use.
Cleaning the reflector:
1) Unplug the power cord from the outlet.
Remove the protective grille from the heater body. (Fig. A, B).
Fig. A
2) Clean the reflector with a soft cloth moistened with a mild detergent, rubbing it to avoid
leaving marks or stains on the surface
Fig. B
20