Publicidad
Idiomas disponibles
Idiomas disponibles
DESCRIPTION
1. Base motor
2. Switch
3. Blade support
4. Blades
5. Bottle
6. Bottle lid
CLEANING AND MAINTENANCE
WARNING
Unplug the appliance when not in use
and before any cleaning and maintenance
operations.
Do not use aggressive or abrasive cleaning
agents or solvents.
Never immerse the base motor, cable or
plug in water or other liquids and do not
place in the dishwasher.
The blades are very sharp. Handle them
with caution.
Wash the blades, bottles and lids with water
and a little detergent. You can also mix
water with a little detergent and run the
appliance with this mixture for 15 seconds.
Then wash the blade holder and bottle
under running water and let dry before
storing.
Clean the base motor with a damp cloth
and then dry with a dry cloth.
OPERATING
Do not leave the device unattended when it
is in use, so that you can intervene quickly
in the event of danger.
DANGER - NEVER ATTACH THE BLADE
HOLDER TO THE BASE MOTOR WITHOUT
PROPERLY THREADING THE BOTTLE INTO
THE BLADE HOLDER.
Before first use
Before using the product for the first
time, clean the parts in contact with
food as described in the CLEANING AND
MAINTENANCE chapter.
Use
Place the base motor on a stable, clean and
dry flat surface.
Make sure the base motor is disconnected
from the power supply.
Completely unwind the cable before
plugging it into the socket.
Place previously cut food in the bottle.
Note - the temperature of the food must
not exceed 50ºC.
Screw the blade holder onto the bottle.
Make sure the blade holder is securely
screwed onto the bottle before placing it
on the base motor.
Place the bottle on the motor base and turn
it clockwise until it clicks into place in the
LOCK position. The device does not work
if the bottle with the blade holder is not
placed correctly.
Connect the device to the mains current.
Turn the ON/OFF knob clockwise and keep
it turned until the mixture reaches the
desired consistency.
English
13
Publicidad
