Atlas Copco LBB16 EP024-U Manual De Instrucciones página 5

Idiomas disponibles

LBB16 EP024-U

Familiarize yourself with the enclosed leaflet "General Safety Instructions for

Drilling and Tapping.

Warning

Disassembly and assembly precautions

The rotor blades (vanes) in the tool contains PTFE. The normal health and

safety recommendations concerning PTFE must be observed when handling

these rotor blades. Particles from wear of blades might be found in the machine

housing or on the blades. Make sure that these particles do not get in contact

with open fire. Wash your hands before smoking since PTFE-particles heated

by glow can produce fumes which may cause an allergic reaction.

General information

EC DECLARATION OF CONFORMITY

We, Atlas Copco Industrial Technique AB, S-105 23 STOCKHOLM, SWE-

DEN declare that the product (with name, type and serial number, see front

page) is in conformity with the following Directive(s):

2006/42/EC

Harmonised standards applied:

ISO 11148-3

Technical file available from:

Quality Manager, Atlas Copco Industrial Technique, Stockholm, Sweden

Stockholm, 1 July 2013

Tobias Hahn, Managing Director

Signature of issuer

Installation

Installation of vibrating tools

It is recommended that a minimum length of 300 mm of flexible hose for com-

pressed air is inserted between a vibrating tool and the quick-action coupling.

Air quality

• For optimum performance and maximum machine life we recommend the

use of compressed air with a maximum dew point of +10°C. We also rec-

ommend the installation of an Atlas Copco refrigeration-type air dryer.

• Use a separate air filter of type Atlas Copco FIL. This filter removes solid

particles larger than 15 microns and also removes more than 90 % of liquid

water. The filter must be installed as close as possible to the machine/equip-

ment and prior to any other air preparation unit such as REG or DIM (please

see Air Line Accessories in our main catalogue). Blow out the hose before

connecting.

Safety and operating instructions