Explanation of Caller ID
Caller ID allows you to see who is calling before you answer a call and to
see who has called in your absence. If the number is stored in the Phone
Book, the callers name will be shown instead. Received calls are stored
chronologically with the sequential number shown in the top right hand
side of the display.
When the Caller ID log is full, the oldest number will be deleted
automatically as the new call is logged. New calls are indicated by text in
the display and flashing of the red ring indicator light. The caller ID log
can store up to 32 calls.
Please note!
In order for numbers to be shown, the Caller ID service must be provided by your
network operator and a current subscription in place. Contact you operator for more
information.
Retrieving and dialling CID numbers
1. Press
to select caller-id mode.
2. Press either
memory.
3. To dial a displayed telephone number either press
displayed telephone number will now be dialled. If you do nothing
the phone will return to standby mode.
Please note!
During a conversation, you can switch from the handset to hands free mode at any time
by pressing
. Press
s
Messages
Besides showing telephone numbers, the display can show a number of
text messages or symbols:
OUT OF AREA
PRIVATE
q
Z
or
to review the numbers stored in the Caller ID
v
V
again to terminate the call.
s
It is an International call or a call from a
PBX (no information received).
Information on the number is blocked. The
call could also be from a PBX.
New number not previously recorded or
logged.
Several calls have been received from the
same caller.
English
OR
, the
s