Haverland CHT-180 Manual De Instalacion Y Uso página 18

EN
2. OPERATION
12. When room temperature is 2 degrees lower than temperature
set, the product will start heating. Press "Temperature" once, it
will show the setting temperature.
13. If the "Temperature" button is press more than once, the
temperature will be set again.
14. If pressing the ON/OFF key doesn't set the temperature, the unit
will continue heating.
15. 00H means that the unit doesn't have a setting time, so the unit
will not heat.
16. If the temperature set is 00ºC, the unit will keep working.
2.2 ADAPTIVE START CONTROL
When the product is in standby mode, the product is not working
with the "Timer" function set. If the product detects the room
temperature to be below 5 ºC, the radiator automatically turns
ON, until the room temperature rises to 10 ºC, then the heater is
automatically switched off.
This function is deactivated if the heater is working regularly or if it
is working on the timer.
2.3 REMOTE CONTROL
All the functions performed with the remote control work
•
identically to the panel control.
When the remote control is not being used, remove the batteries
•
before storage.
CHT180
18