Medion LIFE P61155 Manual De Instrucciones página 54

9. Connecting an external device via
Bluetooth®
In Bluetooth mode, you can receive wireless audio signals from an external
Bluetooth-enabled audio output device. Make sure the two devices are not more
than 8 metres apart.
Only one Bluetooth device can be connected to the soundbar at a time.
To pair a Bluetooth-enabled audio output device with the sound system for the first
time, proceed as follows:
 Switch on the soundbar.
 Press the
button on the soundbar several times or press the button on the
remote control once to select Bluetooth as the audio source.
The LED indicator light flashes blue and the soundbar automatically switches to
Bluetooth pairing mode.
 Switch on the Bluetooth function on your audio output device and activate
search mode on it to pair the two devices.
For more information about the Bluetooth function of your audio
output device, please refer to the corresponding user manual.
The device name of the soundbar "MD 44055" will be displayed in the device list on
your audio output device as soon as the signal is found.
 Select the soundbar and pair the two devices. If you are prompted to enter a
password, enter "0000".
When the devices have been paired successfully, the soundbar will emit an acoustic
signal and the LED indicator light continuously lights up blue.
In Bluetooth mode, the soundbar attempts to automatically connect itself to the
last audio output device connected via Bluetooth.
 To pair a different/new Bluetooth audio output device with the soundbar, and
to disconnect an active Bluetooth connection, if applicable, press and hold the
PAIR button on the remote control for approx. 3 seconds.
The soundbar is now in Bluetooth pairing mode again and the LED indicator light
flashes blue.
If no other Bluetooth audio output device is paired with the soundbar
within 2 minutes, the previous device connection will be re-established.
DE
EN
FR
NL
IT
ES
55