Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING: To prevent the risk of burns, keep your hand away from the area
being steamed.
WARNING: DO NOT steam garments while wearing them; this may result in
injuries.
IRONING TEMPERATURE
• Check the ironing instructions on the label of the items that you wish to iron.
Check the temperature setting table for further instructions.
• Should the specific itoning instructions not appear on the label, follow
instructions on the temperature setting table. This table is only for fabrics
indicated and does not apply to special textiles with a gloss finish, etc. Textiles
with special coatings (such as gloss, relief wrinkles, etc.) are best ironed at
very low temperatures. If the textile consists of several different type of fibers,
always select the lowest temperature, i.e the temperature recommended for
the most delicate fiber in the composition (for example, if the composition
consists of 60% polyester and 40% cotton, you should iron at the temperature
indicated for polyester).
SETTING THE TEMPERATURE
1. Set the iron in on upright position.
2. Connect the Iron to an electrical wall socket.
3. Set the Temperature Control dial (Figure 4) to the correct ironing temperature
as indicated on the lable or the temperature settings table.
GCSBCL-417-000_20ESM1 (US).indd 8-9
(figure 4)
-8-
TEMPERATURE SETTINGS TABLE
Temperature
Kind of Textile
Control Dial
On the label means: This article cannot be ironed (e.g.
chlorofiber, elastodiene)
ANTI-CALC
The Anti Calc feature helps prevent the build up of mineral deposits in your iron.
This prolongs its life and improves the iron's performance.
Fiber Material
synthetic
Acrylic, modacrylic,
polypropylene
Acetate,
synthetic
Rayon , viscose,
synthetic
polyester, cupro,
dal
mo
silk
silk
wool
wool
cotton
cotton
Linen
Linen
-9-
10/26/20 4:19 PM
Publicidad
