Urmet 1060/41 Guía Rápida página 10

CALL TO A USER WITH THE ADDRESS BOOK
Use the address book as follows if you do not know the code of the user you want to call:
1. Pick up the handset 1060/41, if provided.
2. Click on one of the two call data areas (7) or (8).
3. Press button (23) to open the address book.
4. Select the required name.
5. Press the "Handset" (10) button to make the call.
6. The message "Connected" will appear when the user answers in the selected call area
(7) or (8).
To end the call:
1. Hang up the handset 1060/41 or press the button (4).
The message "Busy" will appear if the user is engaged in another conversation in the call
data area (7) or (8).
Press the repeat button (13) to repeat the last call.
RECEIVING A CALL FROM A DOOR UNIT AND FORWARDING TO
A USER
Calls from door units will be sent to the respective switchboard in day mode. This will be indicated by the
special ring tone and icon (10) will blink. The door unit camera feed will appear in the video area (3) and the
caller's indication together with the apartment to be called will be displayed in the call data area (7) or (8).
To answer the call using the 1060/41 handset:
1. Pick up the handset
If a microphone headset it used:
1. Press button (10)
To follow the call:
1. The indication below appears in data area (7).
2. By pressing on the fl ashing
3. At this point, the operator must press the
4. At this stage, the door unit will be put on hold and the call will be forwarded to the
apartment the user wants to contact.
5. Communication is established with the switchboard when the user answers from the
apartment station.
6. The word Connected appears in data area (8) and a still image usually appears in the video images
area (3) (a small box with the same video stream that the user displays on the monitor of the video door
phone will appear in the bottom right instead, if the switchboard is equipped with Webcam, otherwise a
still image will be displayed);
10
Connected
Apartment 01
Call Module
icon, data area (7) appears as shown below:
Apartment 01
Resident 1
On hold
Apartment 01
Call Module
Connected
button to call the internal user.
Calling...
Resident 1
Resident 1
DS1060-123C