Keysight U2600A Serie Guia Del Usuario página 24

1 Getting Started
L-Mount Kit Installation
The L-Mount kit is to be used with Keysight U2781A USB modular instrument
chassis.The following instructions describes simple procedures of installing the
L-Mount kit to a U2600A Series USB isolated DIO modules.
24
1 Unpack the L-Mount kit from the
packaging.
2 Remove your USB device from its plastic
casing by pulling the bumper (front end of the
casing) outward direction. Then, lift the plastic
body casing and remove it from your USB
device.
3 Using the Philip screw driver, screw the
L-Mount kit to your USB device.
Keysight U2600A Series User's Guide