Keysight U2600A Serie Guia Del Usuario página 26

1 Getting Started
General Maintenance
Repair or service which are not covered in this manual should only be performed
NOTE
by qualified personnel.
To remove the dirt or moisture the USB device, follow the instructions below.
1 Power off the USB device and remove the AC/DC adapter cord and USB cable
2 Remove your USB device from its plastic casing by pulling at the bumper (front
3 Holding your USB device, shake out any dirt that may have accumulated on
4 Wipe your USB device with a dry clean cloth.
26
from your device.
end of the casing) outward direction. Then, lift the plastic body casing and
remove it from your USB device.
the panel of your USB device.
Keysight U2600A Series User's Guide