Publicidad
Idiomas disponibles
Idiomas disponibles
3
Features and Functions
// However, users are still allow to re-arrange the channels in 299 or 199 since it
will not alter the SCPI value, 48,128,4,8
-> CONF:DIG:GRO
-> CONF:DIG:GRO
-> SOUR:DIG:DATA:BYTE? (@299)
<- 16
-> SOUR:DIG:DATA:BYTE?
<- 48,128,4,8
-> TRIG:MON:STAT?
<- +1
-> TRIG:MON:STAT?
<- +0
-> TRIG:MON?
<- 0
-> SOUR:DIG:DATA:BYTE?
<- 48,128,4,8
-> SOUR:DIG:DATA:BYTE? (@299)
<- 16
*** From here onwards, users may choose to continue with trigger or turn off
-> TRIG:SOUR NONE
62
201.2,202.4,203.3,204.7,201.5,202.1,203.0,204.2,(@299)
101.3,102.2,103.7,104.5,101.6,102.0,103.4,104.1,(@199)
(@201:204)
(@201:204)
// Although this value has changed
from 31 to 16 due to re-configured of
the channels, it will not affect the SCPI
value. The value in channel 201:204
still remain unchanged. Note that
before the trigger occur, the hardware
value still at 20,128,1,2 but SCPI value
is at 48,128,4,8
*** TRIGGER OCCURED ***
// Check whether a trigger signal is
detected
// "1" mean trigger signal is detected
// Query the second will receive "0"
because this command auto-reset the
register to "0"
// Trigger monitoring process will be
auto turned off when a trigger source is
detected
// After the trigger signal is detect, the
SCPI and actual hardware value are the
same, which is 48,128,4,8
trigger function ***
// Turn off trigger function
Keysight U2600A Series User's Guide
Publicidad
