Keysight U2600A Serie Guia Del Usuario página 58

3 Features and Functions
-> 145,33,123,25
-> TRIG:MON ON
// After start monitor trigger signal, users are not allow to change SOUR
command
-> SOUR:DIG:DATA:BYTE 23,(@201)
-> SYST:ERR?
<- +308,"Channel not able to perform requested operation;
-> SOUR:DIG:DATA:BYTE?
<- 145,33,123,25
-> TRIG:MON:STAT?
<- +1
-> TRIG:MON:STAT?
<- +0
-> TRIG:MON?
<- 0
-> SOUR:DIG:DATA:BYTE?
<- 145,33,123,25
-> TRIG:SOUR NONE
-> SOUR:DIG:DATA:BYTE?(@201:204)
<- 145,33,123,25
58
Chan 201"
(@201:204)
(@201:204)
*** From here onwards, user may choose to continue with trigger or turn off
// Start monitor the trigger signal
// However, user is still allow to make
query on SOUR command. Note that
the actual hardware is still at
233,9,205,11 but SCPI value is at
145,33,123,25
*** Trigger happen ***
// Check whether trigger had
happened and reset to zero when user
query for second time
// This command will also be reset to
OFF, indicating that the trigger
monitoring process has been stopped
// Now the SCPI and actual hardware
value are the same, which is
145,33,123,25
trigger ***
// Turn off trigger function
// Now the SOUR query command
shows the actual hardware value,
which is 145,33,123,25
Keysight U2600A Series User's Guide