JAROLIFT TDRC08W Instrucciones Originales página 22

PROGRAMMING
CHANGE BETWEEN GROUP AND INDIVIDUAL SERVICE
Press the K2 key (see p. 5) briefly to switch between individual control and group control.
control.
With the 8-channel wall transmitter TDRC-08W, an"M" for group control or an "S" for individual control is also displayed.
individual control is displayed.
M S
Press the K2 key Display indicator
briefly. "M" = Multi or "S" =
Single.
Display only with
TDRC08W!
ACTIVATING THE POWER SAVING MODE
Simultaneously press and hold the Up, Stop and Down buttons for approx. 5 seconds.
Power-saving mode is activated.
To deactivate, repeat the procedure.
22