CHANGING THE BATTERY OF A WALL-MOUNTED RADIO TRANSMITTER
The battery life depends on the frequency of switching operations, the ambient temperatures as well as the quality of the
battery and is max. about 3 years.
We recommend, depending on the
frequency of the Depending on the
frequency of shifting, we recommend
battery once a year.
3. Remove the circuit board from the
Support frame
6. Insert the new battery with the
+ (plus) side facing up.
1. Remove the wall transmitter from the
support frame.
4. Turn the board over.
7. Put the front cover of the wall trans-
mitter back on the rear cover.
ATTENTION!
Do not swallow batteries!
Chemical burns!
CHANGING THE BATTERY
2. Remove the rear cover of the wall
transmitter by applying light pressure
(e.g. with your fingernails) in the reces-
ses of the cover.
5. Carefully remove the battery.
CAUTION! Do not use any sharp objects for
this objects to do this, as the printed circuit
of the circuit board could be damaged
8. Insert the hand-held transmitter into
the
support frame.
.
23