Publicidad
Idiomas disponibles
Idiomas disponibles
No voltage at the AC sockets:
• The appliances or extension cords connected to the
generator are faulty;
• The engine was started with the appliances plugged
into the AC sockets;
• The AC pilot light (green) will turn off;
No voltage at the DC terminals:
• The DC overload protector has tripped is "OFF"
positioned;
The warranty for this product is in accordance with the law
in force from the date of purchase. You should, therefore,
keep your proof of purchase during this period. The
warranty covers any manufacturing defect in material or
operation, as well as parts and work needed for their
repairing.
Excluded from the warranty are the misuse of the product,
any repairs carried out by unauthorized individuals (outside
the service center of the brand VITO) as well as any damage
caused by its use.
• Change the equipment or extension cords used;
Repair the equipment or extension cords used;
• Unplug all appliances from the sockets and then switch
the generator back on;
• Stop the engine and switch back on;
• Set the DC overload protector to "ON" position;
We declare, under our sole responsibility, that the product
labelled INVERTER GENERATOR 3000 with code VIGI3000
complies with the following standards
documents:
EN
ISO
1:2006/AC:2010, EN 55012:2007/A1:2009, as defined by:
2006/42/EC - The Machinery Directive
2014/35/EU - Low Voltage Directive
2014/30/EU - The Electromagnetic Compatibility Directive
2016/1628
&
2018/989
(e9*2016/1628*2016/1628SYA1/P*1035*04)
S. João de Ver,
31st january 2022
Central Lobão S. A.
Technical supervisor
Hugo Santos
or normative
8528-13:2016,
EN
60204-
(EU)
-
Euro
V
Directive
Publicidad
