Lenco PDR-016 Manual De Usuario página 12

show the progress of the scan and the number of stations found during
the scan will also be displayed.
If you were listening to a DAB station when you switched the radio off,
then this station will automatically be selected when you switch the radio
back on.
Changing DAB stations
1. Press and release the Next and Prev buttons to scroll
2. When the station that you would like to listen to is
Scanning for DAB stations
With DAB radio, additional stations and services regularly become
available so it's a good idea to carry out a manual scan every now and
then to make sure that you have the most up to date station listing stored
within the memory of your Radio. If you have moved your Radio to
another location, e.g.: if you go on holiday, then it's also a good idea to
carry out a manual scan.
In DAB mode:
1. Press and release the Prev or Next button to begin a search for
stations. The display will change to 'Scanning... '. A progress bar will
show the progress of the scan and the number of stations found
during the scan will also be displayed.
Prune DAB stations
You can remove the DAB stations in the station list that cannot be
received in your area. These are listed with a '? 'Prefix.
through the available stations.
displayed, press and release the Select knob to confirm.
There will be a short delay whilst your radio tunes to your
selected station.
12