Publicidad
Idiomas disponibles
Idiomas disponibles
FM Radio mode
If you are not already in FM mode, press and release the Power/Mode
button to go to FM mode (check the display).
If you were listening to an FM station when you switched the radio off
then this station will be automatically selected when you switch the
radio back on.
Tuning to an FM station
1. Manual Scan
•
Press and hold the Next button to scan up the frequency band.
•
Press and hold the Prev button to scan down the frequency band.
•
Press and release the Next or Prev button to fine tune each frequency
in 0.05MHz steps.
Changing the Scan setting
In FM mode:
1. Press and hold the Menu/Info button to enter the menu options.
2. Press and release the Next button until Scan setting is displayed. Press
the Select knob. The current Scan setting will be highlighted.
There are two different options to choose from:
•
Strong Stations Only - The scan will only stop when a strong signal
strength is received which should also result in a better audio quality.
It is possible that the station you are scanning for may be missed using
this option.
•
All Stations - The scan will stop for every station it receives, even if the
signal strength is poor.
1. Press and release the Next button to choose from the two options
available and press the Select knob to confirm.
Storing an FM station preset
Your radio can store up to 20 FM radio stations in its preset memories
for instant access to your favorite stations. And you can fast preset or
recall the favorite top 3 stations.
17
Publicidad
