Lenco PDR-016 Manual De Usuario página 19

•
•
•
Setting the alarm
Note: Check that the radio has the correct time and date before you set
an alarm. With your radio switched on (not in Standby mode):
1. Press the Alarm button.
2. There are two alarms, alarm 1 and alarm 2, press the
buttons "Prev" or "Next" and confirm with the button
"Select".
3. For On time, press the buttons "Prev" or "Next" to adjust
the time, and confirm with the button "Select".
4. The alarm will last from 10 to 60 minutes, press the button
"Prev" or "Next" to adjust, and confirm with the button
"Select".
5. Three sources to alarm: Buzzer, DAB & FM.
6. Four alarm mode: Daily, Once, Weekends, Weekdays.
7. Alarm volume changes from 2 to 16 levels.
8. Alarm ON & OFF, press the buttons "Prev" or "Next" to
adjust, and activate or inactivate the alarm with the button
"Select"
Stop the Alarm
When the alarm sounds, press Alarm button, Alarm off is displayed.
Alternatively, you can press the Snooze/Select knob (see Snooze
function below).
music title, 'DJ's name, contact details for the radio
station etc.
Program Type (PTY) - Such as 'Rock', 'Pop', ''Talk' or'
'News'
Station name or frequency - Such as BBC R4 or
"93.30MHz
Time and date - supplied by the broadcaster.
1. Repeatedly press and release the Menu/Info button
to cycle through the different information options.
19