Publicidad
Idiomas disponibles
Idiomas disponibles
3 SAFETY
Exposure limits are calculated as a combination of the vibration level (magnitude) of the tool and the Daily
Exposure Time (Trigger Time). e.g. A product with 5m/s² vibration can be used up to 2 hours/day
Exposure Action Value (EAV) - Daily vibration exposure A(8) = 2.5m/s²
Where daily vibration exposure A(8) is below 2.5m/s² the risk is relatively low and no
Exposure Limit Value (ELV) - Daily Vibration Exposure A(8) = 5.0m/s²
Never mow if there is a risk of lightning or you hear thunder. If you are in the middle of mowing, stop in a safe
When you do any welding on the machine, the battery, controller and display must be disconnected before
you start. You must not open the controller. If the controller is opened, this can void all of the warranties and
Personal Protective Equipment (PPE), for example safety glasses, safety footwear, work gloves
and ear protection must be used after the owner/user completes a site specific risk assessment of the
en-16
!
Vibration Exposure Limits
to reach the EAV and up to 8 hours/day to reach the ELV.
action need be taken.
If several tools are use the exposure values must be combined:
Total exposure is then the combined value of the activities.
!
place, turn off the engine and go inside a building.
!
can cause the failure of the machine
!
mower to prevent injury.
WARNING
WARNING
CAUTION
CAUTION
Publicidad
