Publicidad
Idiomas disponibles
Idiomas disponibles
6 CONTROLS
6.13 POWER OUTLET _____________________________________________________
The auxiliary power outlet is on the side of the control panel. It is for use
with mobile phone chargers and accessories.
Automotive 12 Volt, 10 Amp power outlet.
6.14 PARK BRAKE RELEASE VALVE ________________________________________
The Park Brake Release Valve is situated under the seat plate, on the
right hand chassis plate. It is used to release the parking brake when the
engine is not running
To release the Parking Brake:
• Unscrew Lock wheel (B) by rotating counter-clockwise.
• Rotate Hand wheel (A) clockwise until resistance is felt.
• Using the Hand pump (C), create sufficient pressure to release the
brakes (50 to 60 strokes should give 90 seconds of brake release).
• When complete rotate Hand wheel (A) counter-clockwise 3 turns and
lock using Lock wheel (B).
•
6.15 FREE WHEEL________________________________________________________
To push the machine, disengage the Park Brake, (see section 6.14)
• Turn screw (A) located on the left hand side of the transmission pump
1 turn counter-clockwise. Set the steering wheel so that the rear
wheels are pointing straight ahead.
• After pushing the machine, return the Park Brake valve, (see section
6.15) to its normal position and screw (A) on the pump to its
operating position.
en-50
12V
10A
C
A
B
A
Publicidad
