Publicidad
Idiomas disponibles
Idiomas disponibles
the power tool before making any adjustments,
changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the
power tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
e) Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the
power tool's operation. If damaged, have the power
tool repaired before use. Many accidents are caused
by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.,
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
5) SERVICE
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
SAFETY INSTRUCTIONS FOR MIXERS
a) Hold the tool with both hands at the intended
handles. Loss of control can cause personal injury.
b) Ensure sufficient ventilation when mixing flammable
materials to avoid a hazardous atmosphere.
Developing vapour may be inhaled or be ignited by the
sparks the power tool produces.
c) Do not mix food. Power tools and their accessories are
not designed for processing food.
d) Keep the cord away from the working area. The cord
may be entangled by the mixer paddle.
e) Ensure that the mixing container is placed in a firm
and secure position. A container that is not properly
secured may move unexpectedly.
f) Ensure that no liquid splashes against the housing
of the power tool. Liquid that has penetrated the power
tool can cause damage and lead to electric shock.
g) Follow the instructions and warnings for the
material to be mixed. Material to be mixed may be
harmful.
h) If the power tool falls into the material to be mixed,
unplug the tool immediately and have the power
tool checked by a qualified repair person. Reaching
into the bucket with the tool still plugged in can lead to
electric shock.
i)
Do not reach into the mixing container with your
hands or insert any other objects into it while
mixing. Contact with the mixer paddle may lead to
serious personal injury.
j)
Start up and run down the tool in the mixing
container only. The mixer paddle may bend or spin in an
uncontrolled manner.
ADDITIONAL SAFETY WARNINGS
•
Always check that the supply voltage is the same as the
voltage indicated on the nameplate of the tool
•
Never use the tool when the cord is damaged; it must be
replaced by a specially prepared cord available through
the service organization.
•
Never use the tool in or near an explosive atmosphere
•
Never mix combustible substances
•
Wear protective gloves, a dust mask, close-fitting clothes
and sturdy shoes
•
The noise level when working can exceed 85 dB(A);
wear ear protection
•
SKIL can assure flawless functioning of the tool only
when original accessories are used
•
Do not use mixer paddle extensions
•
Always disconnect plug from power source before
making any adjustment or changing any accessory
EXPLANATION OF SYMBOLS ON TOOL
3 Read the instruction manual before use
4 Double insulation (no earth wire required)
5 Do not dispose of electric tools and batteries together
with household waste material
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
•
Do not connect the blue (= neutral) or brown (= live) wire
in the cord of this tool to the earth terminal of the plug
•
If for any reason the old plug is cut off the cord of this tool,
it must be disposed of safely and not left unattended
USE
•
On/off 6
! be aware of the forces that occur as a result of
jamming; hold the tool firmly with both hands and
take a secure stance
•
Speed control for smooth starting 7
Protection frame 8
•
- for protecting the tool
- for guiding the tool
- for putting aside the tool in a simple way
- mount protection frame C before using the tool for the
first time
! never use the tool without the protection frame
•
Operating the tool
! ensure that the tool is switched off
- mount mixing paddle D onto spindle E as illustrated 9
- connect plug to power source
- ensure the mixing container is securely positioned on
the floor
- dip the mixing paddle into the blending substance
before switching on the tool, and then gradually
increase the blending speed by putting more pressure
on trigger (so that the substance will not splash around
and the tool will not be overloaded)
! switch the tool off only when the mixing paddle is
in the mixing container
•
Holding and guiding the tool q
! while working, always hold the tool at the grey-
coloured grip area(s)
! always hold the tool firmly with both hands
8
Publicidad
