Sebson HD GS403 Manual De Instrucciones página 9

▪
Screws for fixing (2 pieces)
▪
Dowels Ø 6mm (2 pieces)
General information about the product:
Note:
Consult a specialist with regard to the installation and in particular the positioning of the device in the
intended rooms in order to ensure that the proper functioning of the heat detector is guaranteed!
▪
1: TEST-button; 2: LED; 3: Speaker (see fig. 2)
▪
This heat detector may only be used in private rooms!
▪
Activate the heat alarm before installation and check the unit for proper functioning on a weekly basis (see
chapter: "Start-up")!
▪
The unit must be replaced after 10 years at the latest and after the battery fault signal sounds (see chapter
"Information about the battery")!
▪
This heat detector can detect excessive heat development at an early stage. This device cannot prevent a
fire or excessive heat development!
▪
This detector does not react to smoke, flames or gas!
▪
This device can monitor a range of 20 to 40m².
General safety information:
Danger:
Never paint or use other solvents on the housing! Never hang any decorative items on the housing and
never cover it! This means that the proper functioning of the device is no longer guaranteed!
Danger of suffocation:
that can be swallowed!
Attention:
Never test the heat detector with an open flame, e.g. a candle or the flame of a lighter! You will damage
the built-in sensor!
▪
Clean the housing at least once a month with a soft vacuum cleaner brush. If there is a high amount of
dust, weekly cleaning is recommended! Dust and dirt can impair the function of the built-in sensor!
▪
This product is only suited for indoor-use and not for outdoor-use!
▪
For groups of people who cannot perceive the alarm, for example because they are hard of hearing or
sleep very deeply, the installation of a heat detector is not sufficient. In this case, take further measures to
ensure that these people are also warned in the event of a fire!
▪
The remodeling of this product is not allowed! The proper and safe functioning of the device can no longer
be guaranteed if it is modified! In addition, this will invalidate the warranty claim!
▪
The manufacture does not accept any responsibility for injuries or damage resulting from improper use of
this product!
▪
Any other use than the description may result in damage to the product. So the dangers are such as
electric shock, short circuit, fire etc.
▪
We reserve the right to make changes to the product, the packaging or the operating instructions as well as
printing errors.
▪
Protect the product from external damage, heavy dirt, moisture and excessive heat!
▪
In order that the warranty claim does not expire please use only the supplied items. Repairs may only be
done by an expert and only by using original spare parts!
Recommended installation locations for heat detector:
▪
Rooms with high humidity, e.g. in the bathroom
Keep this product away from children and animals! The packaging contains small parts
9