EINHELL GE-CT 18/30 Li Manual De Instrucciones página 13

•
Carefully check your machine and its fittings
for signs of damage every time before use. Do
not use the equipment unless the line spool is
installed correctly.
•
When you release the On/Off switch, the
line spool will continue to rotate and will
only gradually come to a standstill. A line
spool which is in the process of rotating to
a standstill can cause you or by-standers
injuries through cutting. Before you start any
work on the line spool, switch off the motor
and ensure that the line spool has come to a
standstill.
•
The danger zone has a radius of 50 ft. (15 m).
Bystanders may suffer blindness or injuries.
Keep a distance of 50 ft. (15 m) between
yourself and other people or animals.
Important: The line spool continues to run for
a few seconds after the motor is switched off .
The line spool continues to rotate!
SAVE THESE INSTRUCTIONS
Explanation of the warning signs on the
equipment (see Fig. 20)
1: Warning!
2: Wear goggles and ear muff s!
3: Protect from moisture!
4: Read the instruction manual before starting!
WARNING – Disconnect battery before
maintenance.
5: Keep other people out of the danger area!
6: The line spool continues to rotate!
7: Store the batteries only in dry rooms with an
ambient temperature of 50°F to 104°F (+10°C
to +40°C). Place only fully charged batteries
in storage (charged at least 40%).
Anl_GE-CT_18-30_Li_USA_SPK7.indb 13 Anl_GE-CT_18-30_Li_USA_SPK7.indb 13
EN
2. Layout and items supplied
2.1 Layout
1. Safety lock-off
2. On/Off switch
3. Battery mount
4. Telescopic handle release
5. Additional handle
6. Additional handle release
7. Lock for rotatable motor head
8. Locking button for motor head tilt
9. Safety guard
10. Mounting screw
11. Line cutter
12. Edge guide
13. Line spool housing
14. Guide wheels
15. Guide wheels mount
16. Guide wheels release
17. Angle adjuster
18. Ribbed push cover points
19. Spool cover
20. Line spool
21. Eyelet
22. Push-lock button
23. Battery capacity indicator button
24. Battery capacity indicator
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
store where you made your purchase at the latest
within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase.
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, keep the packaging until the end
of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, plastic sheets and small parts. There is
a risk of choking and suff ocating!
- 13 -
12.12.2022 13:40:08 12.12.2022 13:40:08