Publicidad
Step 21
Insert the SLIDE CAMS (GGG) into the large holes in the LARGE
å
DRAWER SIDES (D87 and D88).
Fasten the EXTENSION SLIDES (II) to the LARGE DRAWER SIDES (D87
å
and D88). Use four GOLD 5/16" FLAT HEAD SCREWS (RRR) through
holes #1 and #4.
NOTE: The screw head in the CAM must be visible through the slotted
å
hole in the SLIDE.
Repeat this step for the other drawers using the SHORT DRAWER
å
SLIDES (PP and QQ) using holes #1 and #3 in the slides.
NOTE: The DRAWER SLIDES are marked "DRAWER RIGHT" and
å
"DRAWER LEFT" for easy identifi cation.
2
II
3
4
Page 26
Open end
GGG
1
D88
GOLD 5/16" FLAT HEAD SCREW
(12 used in this step)
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
D87
3
4
RRR
408291
GGG
Open end
1
2
II
www.sauder.com/services
Publicidad
