Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instructions
EN
1. Speed adjustment dial – "ON" means standby mode, you can use the
program function and pulse function; "MIN" to "MAX" is stepless speed
control.
2. Pulse function switch – rotate the dial to "ON", by pressing the button the
blender will pulse at maximum speed.
3. Auto Clean function, fill the jug with a maximum of 1.2 litre of tap water
and add a few drops of a dishwasher liquid. Turn the dial to the ON position.
Now press the auto clean button and the blender will start an automatic
program. The program will automatically stop after about 45 seconds. You
can stop the program at any time by pressing the auto clean button again.
Afterwards clean the entire jug with tap water and let it completely dry.
Always place the jar upright to dry, and never upside down. This will protect
the blender jar bearings.
• The max. capacity of the jug is 1.75L, do not allow exceed the max. level mark.
• This blender should not be operated when empty. We suggest 2 parts solid
to 3 parts liquid with an operating time of no longer than 2 min.
* Galaxy Pro model only
6
Publicidad
