Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
When the jug
is on the base
and the power
button does not
light up when
switched to ON
Ingredients are
difficult to blend
Motor stops
during
operation
1. Not plugged into electricity. Replug cord into
power outlet.
2. Electricity not turned on. Check switch is turned
to ON position.
Too many solid ingredients. Add more liquid
1. If the blending jug is not in position or you have
removed the jug during operation, the product
will not work. Replace the blending jug in position,
rotate the dial to "ON", and start again.
2. If blending very tough food or very large pieces,
the blade may get blocked, the current limiter
will then stop the blender. If the current limiter
operates, please switch off the product and
remove the blockage, and then start again.
3. If the product is overloaded and working for long
periods, the thermal limiter will stop the product
to protect the motor from overheating. If thermal
limiter operates wait for 30 min to let the motor
cool down, and then use the product again. If
LED light is still flashing, but the blender is still not
work, wait another 10–20 minutes.
EN
7
Publicidad
