Publicidad
Idiomas disponibles
Idiomas disponibles
Zubehör für AZTV 870-...
AZTV 870... Tischzubehör für die
Umrüstung von Wandgerät zu
Tischgerät.
Upgrade
Access Upgrade Video schaltet nach-
träglich bei einem Audiogerät die
Videofunktion frei.
Für das Haustelefon AHT 870...
wird das AUV 8700 T benötigt bzw.
für das Freisprechtelefon AHF 870...
das AUV 8700 F.
Technische Daten
Betriebsspannung: PoE nach 802.3af
Umgebungstemperatur:
+5 °C bis +40 °C
Abmessungen (mm) B x H x T:
106 x 278 x 51
6
English
Application
Access in-house telephone with door
release button and 7 additional but-
tons with 2-colour status LED. All
buttons are freely programmable.
The display shows the graphic menu
interface, but not a camera image.
It is possible to upgrade to a fully
functional video station.
With the functions calling, speech,
door release, light, remote switching
and call barring.
With the additional purchase of the
AUV 870... T, the AHT 870... can
be transformed into a fully valid
video indoor device.
Performance features:
• Display 8.8 cm
• Input for storey call
• Output freely programmable
• Call differentiation between door
calls, storey calls, and internal calls
• Switching functions
• Status messages
• Can be used with table-top acces-
sory AZTV 870... as a tabletop
device
Electrical voltage
Mounting, installation and servicing
work on electrical devices may only
be performed by a suitably qualified
electrician.
Electrostatic charging
As a result of electrostatic charging,
direct contact with the circuit board
can result in destruction of the
device. Direct contact with the circuit
board must therefore be avoided.
Note
For use only in dry indoor atmos-
pheres.
Scope of supply
• AHT 870... (Base plate and
housing with circuit board)
• Receiver
• No-tangle cord
• Two RJ45 plugs
• Operating instructions for the
end user
• This product information
Mounting
1 Recommended mounting height
appr. 1.65 m to display height/
viewing height.
2 Open the device from the back
by releasing the base plate with the
locking lever.
3 Align the base plate centrally rela-
tive to the flush mounted socket and
mark the fixing holes.
4 Insert the provided RJ45 plug on
the adapter circuit board. Fasten
the base plate directly on the wall
using 4 screws, paying attention that
the plate is the right way up (top
marking).
5 Insert the coloured plug of the
no-tangle cord into the socket at the
housing. A distinct click is audible
when the plug is correctly inserted.
6 Insert the other end of the no-
tangle cord in the receiver until
the plug clicks audibly into place.
This connection can no longer be
detached.
7 Hook the housing into the base
plate from above and close by
exerting a slight pressure.
Dismantling
8 To remove the housing, press
the lock upwards using a flat blade
screwdriver. The circuit board and
receiver remain on the upper part of
the housing.
Lettering
9 The lettering panel can be
inscribed to indicate the button
functions. The see-through panel
can be lifted at the side.
A marking template is provided in
the download area of our website.
Publicidad
