Publicidad
Idiomas disponibles
Idiomas disponibles
PART FIGURE
Power selection knob
Temperature control knob
Air outlet
OPERATING INSTRUCTION
Check before turning on the machine
1. Check if the power wire is under good condition.
2. The product adopts 220-240V AC power supply, before use, please confirm if
the rated current of the power socket meets the local requirements with safe
grounding device, otherwise, please replace it with the qualified socket.
Temperature Control Knob
Insert the plug into the power socket, then turn the Temperature Control knob
clockwise, when hearing the "poop" sound (it means the temperature controller is
on), adjust the Temperature Control knob to the desired temperature level.
Power Selection Knob
Turn the Power selection knob to select between 4 functions: Low "
High "
"1500W ,Low swing 1000W(LOW OSC),High swing 1500W(HIGH OSC)
Turn off the Heater
A. Turn the Power selection knob to OFF position.
B. Turn the Temperature Control knob anticlockwise to the initial position.
C. Remove the power plug, store the heater after the entire machine has become
cool.
Pilot light
3
Handle
Air inlet
Base
"1000W,
Publicidad
