Midea NTY15-19CAE Manual De Usuario página 13

Safety Protection
1.Overheat protection: When the temperature in the heater is too high due to
abnormality in the use environment or improper use, the thermostat device can
automatically cut off the power and the heater stops working. After the whole
heater is cooling, the heater can return to the normal use after removing the
abnormality.
2.Inversion protection: When the whole heater is inverted, the safety system will
automatically cut off the power, and return to the work state before inversion after
the body is placed upright.
MAIN TECHNOLOGY SPECIFICATIONS
Power supply: AC 220-240V ~ 50Hz
MODEL
NTY15-19CAE
Troubleshooting
If the product does not operate or does not operate properly, first check according to the following
list. If the reason the product does not operate or does not operate properly is not included in the
following list, the product mayhave failed. At this time, it is recommended to send the product to
the dealer for treatment .
Problem
A er the power is
engaged, the power
indicator light does not
illuminate and the
machine does not work.
The machine suddenly
stops during hea ng.
READ AND SAVE THESE INSTRUCTIONS
POWER REGULATION RANGE (W)
LOW
HIGH
1000 1500
Possible Cause
The plug may not be
plugged well.
The temperature control
knob is not turned in
place.
The temperature exceeds
the threshold of the
thermal cut-off.
LOW OSC HIGH OSC
1000
Solu on
Check whether the plug is
properly inserted into the
receptacle.
Check whether the
temperature control knob
is turned to the ON
posi on.
Cool the machine before
use.
4
1500