Surewerx JACKSON Reapers n' Roses 47104 Manual Del Usuario página 7

Instructions for Adjusting Headgear
1. Remove headgear by unscrewing the headgear nuts
(C) and flexing the helmet shell off of the headgear
screws (A) (Fig. 6).
2. Insert the headgear (A) into the helmet shell (B) as
shown in the figures below.
3. Push the screws (A)
through the openings in
the helmet shell. Engage
the small tilt positioning
pins (E) into the desired tilt
positioning holes in the shell.
8
6
7
7