Surewerx JACKSON Reapers n' Roses 47104 Manual Del Usuario página 8

Instructions for Adjusting Headgear
4. Tighten a headgear nut (C) onto each screw.
5. Adjust the headgear to optimize comfort and fit. The perimeter of the flexi-seal
should touch your face and extend below your chin.
6. Adjust the length of the top strap so the headgear rests at a comfortable
position around your head (Fig. 7).
7. Adjust the range of tilt of the helmet by adjusting holes the pins engage (Fig. 8).
8. Adjust the distance of the helmet from the face by loosening the headgear nuts
so the hinge mechanisms can be moved forward or backward along the headgear
to the desired position. Then re-tighten the headgear nuts (Fig.8).
8