Sinbo SVC 3470 Manual Del Uso página 13

2. Cleaning and changing filter or HEPA
* Filter for air-inlet should be cleaned at least twice a year or when it becomes visible solid.
* Clean HEPA for air-inlet when you find it is filled in.
* HEPA for air-inlet and filter for air-outlet are changed.
* Always operate the cleaner with filters and HEPA installed.
* Otherwise, reduced suction or motor damage may be result.
* Disconnect from electrical outlet, before cleaning filter.
* Do not use a washing machine to rinse filter.
* Do not use hair drier to dry it.
3. Cleaning and changing filter and HEPA for air-inlet
(1) Rotate dust cup clapboard until it is unlocked.
(2) Take out HEPA assembly.
(3) Rotate the HEPA tray ,until it is unlocked.
(4) Take out the bracket from the dustcup' clapboard.
(5) Rotate HEPA from the dustcup' clapboard . until it is unlocked.
(6) Rinse bracket and HEPA in lukewarm water and dry Filter and HEPA
completely.
(HEPA is rinsed by brush.)
- 12 -