Publicidad
Idiomas disponibles
Idiomas disponibles
To adjust the shaft length, open the lock lever, then
adjust the length of the shaft, and then close the lock
lever.
1
Fig.18
► 1. Lock lever 2. Shaft
Adjust the position of the loop handle so that you can
hold the loop handle when lowering your left hand.
Fig.19
► 1. Loop handle
Cutting the grass
Hold the grass trimmer with both hands, and move the
grass trimmer from right to left slowly. Cut the grass a
few times from the top of the grass at the tip of the nylon
cord.
NOTICE:
Do not cut high grass at a time. Cutting
the high grass at a time near the root may cause the
nylon cutting head to be entangled by grass. This
may cause the motor overload, resulting in damage to
the grass trimmer.
2
1
11 ENGLISH
NOTICE:
Use the grass trimmer without get-
ting the nylon cutting head into a contact with
the ground surface. Using the nylon cutting head
contacting the ground surface may cause the motor
under overload resulting in damage to the grass
trimmer.
Fig.20
NOTICE:
Do not force the trimmer in densely
growing grass.
Fig.21
Publicidad
