Publicidad
Idiomas disponibles
Idiomas disponibles
I n s t r u c t i o n s f o r u s e
B E F O R E U S E
-
Make sure that you have removed all
packaging material from the product.
-
Before using the product for the first time,
clean the parts in contact with food as
described in the Cleaning section.
-
During the first use it is normal for the
appliance to give off a slight plastic odor.
This does not affect the operation of the
appliance.
-
Leave a minimum of 35 cm of space
around the appliance when it is to be
used.
-
Place the appliance on a stable horizontal
surface. Do not place the appliance on
surfaces that do not withstand heat.
U S E
-
Grasp the handle of the baskets and
carefully remove them from the fryer by
pushing them outwards.
-
Put the food inside the baskets, on top of
the inner grid.
-
Replace the baskets with the food inside
the fryer.
-
Note: The appliance will not operate until
the baskets are completely closed inside
the fryer.
-
Unwind the appliance cable completely
before plugging in.
-
Plug the appliance into the mains.
-
As soon as the appliance is plugged in, 1
beep sounds, indicating that the appliance
is switched on and the on/off button (12)
lights up.
-
To activate the digital display, press the
on/off button.
-
When the on/off button is pressed, a long
beep sounds and the digital display lights
up.
M A N U A L M O D E
-
Once the ingredients are inside the
baskets and the fryer is plugged in,
select basket 1 or 2 (by pressing the
buttons (20) or (11) respectively), to set
the time and temperature.
-
When basket 1 is selected, buttons (20),
(13) and (17) will flash.
-
Press the button (18) to select the
temperature and time of basket 1.
-
Using the +/- buttons, set the
temperature and time.
-
Once basket 1 has been set, select
basket 2 and repeat the same operation.
-
Press the start/pause button to start
cooking.
-
During cooking you can change the time
and temperature. Simply select basket 1
or 2 and then change the time or
temperature.
-
If you wish to stop one of the baskets
during cooking, press and hold the
button (11) or (20) for 2 seconds. The
selected basket will stop but the other
one will continue cooking.
-
To pause both baskets at the same time,
press button (13).
M E N U S M O D E
-
Once the ingredients are inside the
baskets and the fryer is plugged in,
select basket 1 or 2 (by pressing buttons
(20) or (11) respectively).
-
When basket 1 is selected, buttons (20),
(13) and (17) will flash.
-
Press the menu selector (19) to select
the desired menu. Keep pressing this
button to change menus.
-
You can change the temperature and
time of the menus. Simply follow the
steps explained in the manual mode.
-
Once the menu for basket 1 has been
selected, follow the same steps for
basket 2.
-
Press the start/pause button to start
cooking. Only the selected menus will
appear on the display.
-
During cooking you can change the time
and temperature. Simply select basket 1
or 2 and then change the time or
temperature.
Publicidad
