Publicidad
Step 33
å
Refer to the enlarged diagram to identify the parts on
the HINGE.
å
The DOOR may need some adjustments. Follow the text
below to make needed adjustments.
å
DOOR ADJUSTMENTS:
To adjust the DOOR from side to side (horizontal), turn the
adjusting screw in or out.
å
To adjust the DOOR up and down (vertical), loosen both
vertical adjustment screws. Move the DOOR up or down
to the desired location. Tighten the screws after making
adjustments.
å
To adjust the DOOR in or out (depth), loosen the mounting
screw one turn and move the DOOR in or out, as needed.
Tighten the mounting screw after making adjustments.
Page 38
Adjusting screw (horizontal)
433851
17
Mounting screw (depth)
(vertical adjustment)
www.sauder.com/service
Publicidad
