Record Of Document Revisions - Kollmorgen AKM Serie Manual De Instrucciones

AKM Installation | 11 Record of document revisions

11 Record of document revisions

Revision Remarks
01 / 2009 First multilingual edition
06 / 2010 Appendix renamed to Drawings, AKM8 added, symbols according to ANSI Z535, Hiperface added,
minor corrections, technical data moved to appendix, new windings for AKM4 to 7, radial-/axial force
diagrams new for AKM1 to 8
10 / 2010 Transport tool order information, wiring diagrams updated for H connector
12 / 2010 Weight data AKM8, derating AKM8, DIN 748 => EN 50347, company name&address
04 / 2011 Washdown Variants, some minor corrections, climate categories, flange temperature limit
12 / 2011 EnDat encoders RoHS compliant, SFD combi connector option "D", GOST-R certificate, AKM8
dimensions corrected, AKM7 transport, Washdown Food
03 / 2012 AKM3: FRmax corrected, Washdown Food information extended, peak current/torque data AKM1 to
AKM7 updated
08 / 2012 AKM 1 extended options, wiring diagrams removed, connector pinout section added, KTY thermal
sensor version added, CE certificate, part number scheme extended
04 / 2013 Brake data, y-tec power pinout corrected, AKM 7 fan option, i-tec connector new, KTY thermal
sensor version updated
04 / 2014 Hint for 65°C max. flange temp. removed, data 65M 480V updated, SpeedTec Ready connector for
AKM4 to 7 (dimension drawings updated), AKM83V added
06 / 2014 Layout change, 6 languages version
11 / 2014 Technical data Peak Current Sym/Unit corrected, AKM72Q/73Q with fan added, connector option H
extended for AKM7xQ, data AKM83V updated, connector option D: SFD(PTC)/SFD3-DSL(KTY),
certificates removed, GOST-R removed
12 / 2014 Technical data holding brakes updated, Connector-Feedback relationship table new
04 / 2015 EAC certification, connector/feedback tables optimized, Molex connectors removed, shaft seal
run-in added,FR/FA diagram for AKM8 with enforced bearing added, AKM 2/3 SpeedTec con-
nectors, RoHS and REACH statements added
09 / 2015 Back cover page updated, DriveCLiQ feedback added, Washdown information updated (flanges),
AKM64Q data (R, L) corrected, Safety feedback devices added, Connector-Feedback table
updated, y-tec Comcoder pinout new
05 / 2016 Feedbacks GM/GN/GP/GR mapped for AKD only, DriveCliQ power connector updated, shaft seal
notes, LVD 2014/35/EU, EMCD 2014/30/EU, IP protection class updated, SpeedTec connector
drawing updated, AKM and Washdown mating connectors added,keyway standard added
01/ 2017 Option KTY83-110 added, Washdown installation and mating connectors updated, AKM1 dimen-
sions updated, DriveCliq dimensions added, Brake specification updated, Brake and feedback derat-
ing updated, Hybrid cable option updated,
11/2017 Connector options G, H updated, Low Voltage windings added, corrected value B
note about B
01/2018 Number of springs updated
06/2018 Thermal sensor KTY 83-110 replaced by PT1000, pin-outs updated
10/2019 Holding brake chapter and data updated, total torque rise time and response time with AKD added,
dimensions of commcoder for AKM1 added, safety symbols updated, connector current updated
214 Kollmorgen | kdn.kollmorgen.com | October 2019
and number of springs, AKM82T resistance updated, Web pages updated
10d
for AKM4 brake,
10d