2.14
Operating and display functions
Note
The functions described in this section are not available for all system configurations.
To call up the menu, press
2.14.1 Menu item CONTROL
MENU
CONTROL
Zone
Heating
Mode:
Manual
Desired temperature: °C
Time-contr.
Weekly planner
Desired temperature: °C
Set-back temperature: °C
Off
Cooling
Mode:
Manual
Desired temperature: °C
Time-contr.
Weekly planner
Desired temperature: °C
Off
Name of zone
Absence
All
Zone
Cooling for several days
Fixed value control, circuit 1
Mode:
Manual
Time-contr.
0020287900_03 Operating and installation instructions
twice.
Uninterrupted retention of the desired temperature
What do the different temperatures mean? (→ Section 2.3)
What is meant by "time period"? (→ Section 2.9)
Up to 12 time periods and desired temperatures can be set per
day.
The competent person sets how the heating installation behaves
outside of the time period in the Set-back mode: function.
In Set-back mode: means:
–
Eco: The heating is switched off outside of the time periods.
Frost protection is activated.
–
Normal: The set-back temperature applies outside of the time
periods.
The Desired temperature: °C applies within the time periods.
What do the different temperatures mean? (→ Section 2.3)
What do the different temperatures mean? (→ Section 2.3)
Heating is switched off, domestic hot water continues to be avail-
able, frost protection is activated
Uninterrupted retention of the desired temperature
What do the different temperatures mean? (→ Section 2.3)
What is meant by "time period"? (→ Section 2.9)
Up to twelve time periods can be set per day
The Desired temperature: °C applies within the time periods.
Cooling is switched off outside of the time periods.
What do the different temperatures mean? (→ Section 2.3)
Cooling is switched off, domestic hot water remains available.
Changing the name Zone 1, which was set at the factory
During this time, heating mode runs at the defined set-back tem-
perature. Domestic hot water mode and circulation are switched
off. Frost protection is activated; existing ventilation runs at the
lowest level.
Factory setting: Set-back temperature: °C 15 °C
Applies for all zones within the specified time period.
Applies for the selected zone in the specified time period.
Cooling mode is activated in the specified time period; cooling
mode and desired temperature are used from the Cooling func-
tion
Uninterrupted retention of the Target flow temp., desired: °C that
the competent person set beforehand.
What is meant by "time period"? (→ Section 2.9)
63