Evenflo Advanced Single Manual De Instrucciones página 6

Check the Fit of the Flange
The Advanced Single Electric Pump works with the Evenflo AdvancedFit™ Flange System.
The Advanced Single Electric Pump comes with the Large 30.5mm base flange size and
the Medium 28.0mm silicone flange insert. Additional sizes are available separately for
purchase, allowing you to find your best fit.
The AdvancedFit™ Flange System available sizes include:
• 21.0mm (insert) • 30.5mm (no insert)
• 24.5mm (insert) • 33.0mm (insert)
• 28.0mm (insert) • 36.0mm (no insert)
To use silicone flange insert, press it into the tunnel of the hard flange firmly. Then ensure
that the outside edges of the insert wrap around the hard flange.
Correct Flange Size vs. Too Small or Too Large
A proper flange size is needed for comfort and to maintain your milk supply. Your flange
size can change several times throughout your journey. Recheck your flange fit frequently
to ensure you are using the proper flange size.
FLANGE TOO SMALL CORRECT FLANGE SIZE
While pumping, some While pumping, your nipple
or all of your nipple rubs should move freely in the
against the sides of the flange tunnel. You should
tunnel. Use a larger size. see space around the
nipple. A minimal amount
of your areola is drawn into
the tunnel with the nipple.
IMPORTANT
• DO NOT use the flange insert if your nipple is larger than the center opening.
• Your breast may change over time. Should this occur, choose a different size for
maximum comfort.
• Included flange sizes may not fit all breast and nipple sizes, but additional sizes
can be purchased separately. If you are having issues after trying all included sizes,
please contact our Parent's Ally Consumer Care for assistance.
8
USA/Canada: 1-855-EFI-BABY (334-2229) • www.evenflofeeding.com
FLANGE TOO LARGE
While pumping, too
much of the areola is
drawn into the tunnel
with your nipple. Your
areola may rub against
the side of the tunnel.
Use a smaller size.
Using Your Breast Pump
1
Stimulate your milk release before attaching
the pump to maximize your pumping results
by:
• Relaxing and thinking about your baby.
• Gently massaging your breasts, starting on
the outside of your breast working down
toward the nipple.
• Applying warm, moist compresses;
continue until you can hand-express a few
drops of milk.
Now you should be ready to use your pump.
A
2
For best results, hold the pump by the flange
A. Place the flange A against your breast with
your nipple centered in the flange tunnel.
Press directly against your breast to create a
good seal.
DO NOT hold the pump unit while pumping.
For best results, hold the flange directly.
Note: Be sure the outside edge of the
flange has a complete seal against the
breast without excessive pressure.
USA/Canada: 1-855-EFI-BABY (334-2229) • www.evenflofeeding.com
9