Kärcher T 9/1 Bp Pack Manual Del Usuario página 13

Troubleshooting
Indicator lamp for battery on the ap-
pliance is blinking
– Battery empty
 Charge the battery.
– No battery is inserted
 Insert the battery.
Appliance is not running
In battery mode
– PCB overheated
 Mains operations are possible.
Note
The appliance can be operated in battery
mode after the PCB has cooled down.
– Batteries empty
 Charge the batteries.
– No battery is inserted
 Insert the battery.
In mains operation
– Power supply cable is faulty
 Inform Customer Service
If malfunction can not be fixed, the de-
vice must be checked by customer serv-
ice.
Special accessories
Description
Electro-suction brush ESB
28 24V (DC)
Carrier belt
Spare battery
Quick charger, BC 1/1.8, single
EU
GB
AUS
Quick charger, BC 4/3.0, 4-times
EU
GB
The warranty terms published by the rele-
vant sales company are applicable in each
country. We will repair potential failures of
your appliance within the warranty period
free of charge, provided that such failure is
caused by faulty material or defects in man-
ufacturing. In the event of a warranty claim
please contact your dealer or the nearest
authorized Customer Service centre. Please
submit the proof of purchase.
Our KÄRCHER branch will be pleased to
help you further in the case of questions or
faults. See address on the reverse.
Order No.
2.789-003
6.906-876
6.654-183
6.654-190
6.654-196
6.654-201
6.654-204
6.654-216
Warranty
Customer Service
13
English