THOMSON SB350BTS Manual De Instrucciones página 15

Idiomas disponibles

switch to optical mode.

The white LED light will come on.

Audio from the connected audio source will now be played through the speakers.

Using the auxiliary input RCA (3.5mm RCA cable, supplied)

1. Connect a 3.5mm audio input cable (not included) to the 3.5mm audio input on the

soundbar and an audio source.

2. Long-press the

to switch the unit on.

3. Press the

button repeatedly on the unit or press the AUX button on the remote to

switch to AUX mode.

4. The green LED light comes on.

5. Use the controls on the connected audio device to begin playing music through

the connected soundbar.

Using Bluetooth

Note: The maximum connection distance is around 10 metres. Please place your Bluetooth

speaker as close as possible to this device to avoid the connection being disturbed.

Please make sure your mobile phone is Bluetooth-enabled. Specific pairing steps may

vary with different mobile phones. Please refer to the user manual of your mobile phone for

further information. The main pairing steps are as follows:

1. Keep the SB350BTS soundbar and Bluetooth mobile phone within 1 metre of each other

when pairing.

2. Long-press the

to switch the unit on.

3. Press the

button repeatedly on the unit or press the

switch to BT mode. The blue LED light will switch on.

4. Switch on your mobile phone's Bluetooth function and search for Bluetooth devices.

After the search is completed, select "SB350BTS" from the Bluetooth device list.

5. As indicated, enter the password or PIN code: "0000" and press "Yes" or "Confirm".

6. After successful pairing, select "SB350BTS" from the Bluetooth device list and press

"Connect".

7. Press  to play / pause the music.

8. Long-press "+" to turn up the volume.

9. Long-press "-" to turn down the volume.

10. Press "<" to return to the previous song.

11. Press ">" to skip to the next song.

button on the unit or press the

button on the remote control

- EN 15 -

button on the remote to